WM-Doll big breast 125cm Quincy

Colour: Silver/grey
short, chin-length parted on the side

Colour: Dark brown
Bob cut with fringe

Colour: Dark brown
long, straight and parted on the side

Colour: Black
straight, long with a fringe

Colour: Chestnut
shoulder-length and parted on the side

Colour: Dark blonde
long, straight with a side-fringe

Colour: Red-brown
shoulder-length, straight and parted on the side

Colour: Dark brown
long, wavy and parted on the side

Colour: Blonde
long, wavy and parted in the middle

Colour: Blonde
long, straight and parted in the middle

Colour: Pink
long, straight hair that's parted in the middle

Doll4me Love Doll – firmly built-in or exchangeable vagina? Each vagina is firmly built-in. When buying a Doll4me sex doll you have the choice between a doll with an integrated i.e. firmly built in or an exchangeable vagina.
In this article, we want to briefly outline the advantages and disadvantages of each type.

Exchangeable Vagina:

This type of vagina can be removed.

Advantages:

• Easy cleaning
  After use, you can remove the vagina, clean it with water and allow it to dry thoroughly.
• Use of different vaginas
  You can use different types of vaginas, e.g. while one is still drying after the cleaning process, you do not have to wait but can simply use another one.
• Replacing the vagina
  You can replace the vagina, if the shape does not suit you anymore.
• Extended life-cycle of your Doll4me sex doll
  The exchangeable vagina allows for a better cleaning of your Doll4me doll thus increasing her life expectancy.

Disadvantages:

• Goes out of shape
  The exchangeable vagina can go out of shape after an extended period of time and might not sit so firmly in your Doll4me sex doll

Built-in vagina:

This type of vagina cannot be removed from the doll.

Advantages:

• A more realistic shape
  The vagina looks and feels more realistic.
• Firm fit
  The vagina fits tightly and without creases in your Doll4me doll

Disadvantages:

• Difficult to clean
  You should use an irrigator with soapy water for cleaning and dry the vagina thoroughly afterwards.
• Cannot be removed
  If the vagina goes out of shape, it cannot be swapped for a new one.

The decision is yours – only you can decide, what is important to you.

So far, the majority of our customers has decided on a built-in vagina, because of its more realistic shape.

We recommend the purchase of an exchangeable vagina with each Real Doll for hygienic  reasons.

The doll's heating system works via heating wires, that are built into the body. They use 48 V direct current. The Power Adapter uses a a voltage of 110V – 220V. The heater has a wattage of 100 W – 120W.

When plugging the doll into a power source, the heating system starts up automatically, there is no separate switch for this system. Warming up the doll takes about 30 – 60 minutes. When you find that the doll has become warm enough, simply unplug it. The heater must not be run for more than 2 hours at a time. Please do not leave the doll unsupervised during the heating process despite the built in temperature control device.

Avoid contact with water at the interface of heating system and the sound system's speaker. The doll cannot be used during the warming process.

Before connecting the power cord to the power supply, check that the correct supply voltage is available. Use only in a well-ventilated place. Use in a wet environment is prohibited.

Never open the cover of the power adapter, because the high voltage can result in life-threatening injuries!

Technical specifications:

Electric field 110 – 240 V, Max: 90V – 264V (worldwide use possible)

Fuse function for short circuit, overvoltage and overload

Robust performance – 100% Full load tested
High insulation properties
For 100cm - 175cm TPE Premium Sex Dolls

Input: 100 – 240 V AC 50 / 60Hz Max: 90 – 264 V AC 47 / 63Hz

Nominal output: 48V DC +- 5%

Heating output: 144W

Energy efficiency class A+++

Function: By pressing a spot on the doll, for instance her breast, the integrated pressure sensor sends a signal tot he chip. The chip then retrieves the saved signal, which is played back via a sound system.

https://youtu.be/p9kzbtlydrc

Individual parts:
(1) Battery: 3.7V Lithium Battery, capacity 200MAH
(2) Press switch
(3) 29 mm high-quality, ultra-thin magnetic plastic speaker
(4) Memory card 32M TF card.
(5) Air pressure sensor

Use:
Press the power switch and wait 30 seconds for the pressure sensor chip to automatically detect the pressure data inside the body of the doll. Do not press any other spot on the body within these 30 seconds, as this will result an incorrect pressure reading. After completion of the automatic detection, you can press the doll anywhere, the chip will automatically play the corresponding music file after receiving the corresponding pressure reading.

Attention:
By pressing any point before the automatic detection is completed, the chip will detect an incorrect pressure reading and will not reproduce the correct sound. If you press several different spots, the doll will reproduce different sounds, see also video

1: Image 01 Pressure sensitive sounder, external construction
2: Image 02 Pressure sensitive sounder, internal construction